|
|
 Quick Links |
| Partners |
|
InkRepublic.com - Knowledge Base
Q: How can I fill the ink to damper?
1.Pass the Tube through the "Ink Stopper". Repeat it until each the tube has its own stopper.
2.Put the ink tubes into the bottles.
3.Use the Vacuum Pump from included in the kit, squeeze it and place it at the location of the 0-ring of the
damper then release the grip on the pump so that the ink will be sucked/directed into the tubes
and eventually up to the dampers.
4.When the damper is full filled with the ink, clip the "Ink Stopper".
5.Repeat 3 and 4 untill you fill all of dampers with corresponding colors.
|
|
|
|
|
|
Epson SureColor P600 refill
Epson SureColor P800 refill
Epson R2000 CIS
Epson R3000 CIS, refill
Epson 3800 CIS
Epson R260, R280, R380, RX580, RX680, RX595 CIS
Epson 1400 CIS
Epson C120 CIS
Epson R800 CIS
Epson R1900 CIS
Epson R1800 CIS
Epson R2400 CIS
Epson C88 CIS
R200 R300 R320 R340 RX500 RX600 RX620 R220 CIS
2200 CIS
960 CIS
1280 CIS
CX6400 CIS
C84 C86 C88 CIS
Epson Bulk Ink system / Continuous Ink system for Epson dye ink
Epson Bulk Ink system / Continuous Ink system for Epson pigment ink
Epson Bulk Ink system / Continuous Ink system for Epson dura ink
Epson Bulk Ink system / Continuous Ink system for Epson durabrite ink
Epson Bulk Ink system / Continuous Ink system for Epson sublimation ink
Epson Bulk Ink system / Continuous Ink system for Epson heat transfer
