InkRepublic.com
* Free Shipping To All Over The World, Click Here.        Site Map
   Quick Links
   Partners

InkRepublic.com - Knowledge Base
Q: How to remove R260/R280/R380/RX580/RX680 cartridge lid?

In order to install InkRepublic R260/R380/RX580 i-INK2 system, you will need to remove original cartridge lid and install InkRepublic's lid.

1. Locate the cartridge lid retaining clip, it is located on top of the printer cartridges.

2. Carefully pry the clip forward so that it will unlock from the printer cartriage and release the lid.

3. When the clip releases it can be removed. Please note that due to the design of this clip it may be damaged during removal thus making it impossible to reinstall the carriage lid in the future. However, if your clip does get damaged your printer will still operate normally.



















  © 2017 InkRepublic.com                      Email: CustomerCare@InkRepublic.com About Us | Contact Us
Epson SureColor P600 refill Epson SureColor P800 refill Epson R2000 CIS Epson R3000 CIS, refill Epson 3800 CIS Epson R260, R280, R380, RX580, RX680, RX595 CIS Epson 1400 CIS Epson C120 CIS Epson R800 CIS Epson R1900 CIS Epson R1800 CIS Epson R2400 CIS Epson C88 CIS R200 R300 R320 R340 RX500 RX600 RX620 R220 CIS 2200 CIS 960 CIS 1280 CIS CX6400 CIS C84 C86 C88 CIS Epson Bulk Ink system / Continuous Ink system for Epson dye ink Epson Bulk Ink system / Continuous Ink system for Epson pigment ink Epson Bulk Ink system / Continuous Ink system for Epson dura ink Epson Bulk Ink system / Continuous Ink system for Epson durabrite ink Epson Bulk Ink system / Continuous Ink system for Epson sublimation ink Epson Bulk Ink system / Continuous Ink system for Epson heat transfer